Focal Point Banner


As of December 1, 2020, Focal Point is retired and repurposed as a reference repository. We value the wealth of knowledge that's been shared here over the years. You'll continue to have access to this treasure trove of knowledge, for search purposes only.

Join the TIBCO Community
TIBCO Community is a collaborative space for users to share knowledge and support one another in making the best use of TIBCO products and services. There are several TIBCO WebFOCUS resources in the community.

  • From the Home page, select Predict: WebFOCUS to view articles, questions, and trending articles.
  • Select Products from the top navigation bar, scroll, and then select the TIBCO WebFOCUS product page to view product overview, articles, and discussions.
  • Request access to the private WebFOCUS User Group (login required) to network with fellow members.

Former myibi community members should have received an email on 8/3/22 to activate their user accounts to join the community. Check your Spam folder for the email. Please get in touch with us at community@tibco.com for further assistance. Reference the community FAQ to learn more about the community.


Focal Point    Focal Point Forums  Hop To Forum Categories  iWay Software Product Forum on Focal Point    Scheduler Configuration in DMC

Read-Only Read-Only Topic
Go
Search
Notify
Tools
Scheduler Configuration in DMC
 Login/Join
 
Member
posted
We want to be notified by email whenever any of our flows fail in DMC. According to the Help section titled "Performing Server Administration Tasks From the Web Console", I should be able to initiate this process by changing the Scheduler Configuration. We have restarted the server and the application. However, this is still not working. We are able to receive the failure message on a per-flow basis so we know that the server is configured properly. Is there another setting that we need to change in order to make this work?


7.6.9, Linux
All
 
Posts: 6 | Location: Newton, MA | Registered: August 28, 2009Report This Post
Platinum Member
posted Hide Post
Have you looked into the server log? Make sure you don't see anything like this:
(ICM18772) Error to send email: connection failed: RC = 32074


Since it's working on a per-flow basis, that's probably not it, but it can't hurt to look.

I thought sending emails was a per-flow thing, but looking at the documentation again, I can see what makes it look like something that can be set globally. If you don't find any errors in the server log, I'd recommend opening a case with IBI. Or maybe Clif is monitoring this forum and can comment.


Data Migrator 5.3, 7.1, 7.6
WebFOCUS 7.1, 7.6, 7.7
SQL Server, Oracle, DB2
Windows
 
Posts: 126 | Registered: January 18, 2007Report This Post
Guru
posted Hide Post
That's right.

First you have to enable sending email. You've apparently done this, but for others: From the Web Console main menu Workspace > Configuration. From the tree that opens General > E-Mail. Then enter values for smtp_host (something like company.smpt.com) and sender_email. Test and Save.

Then configure sending email for all flows. Go to Worspace Configuration > Special Services > Scheduler. For sched_email pull-down select Failure. Save and restart Scheduler.

You must also enable the individual flows and specify the email address to send the messages to. Open the flow, from the main menu Flow Properties > e-Mail Notification. Check failure and enter the email address.

Note that Scheduler Configuraton sends email for scheduled flows. Not Test Run, not Run Deferred. Only flows that run through the scheduler.

(On a technical level that means only flows initiated by CMSASAP, not EX.)

This message has been edited. Last edited by: Clif,


N/A
 
Posts: 397 | Location: New York City | Registered: May 03, 2007Report This Post
  Powered by Social Strata  

Read-Only Read-Only Topic

Focal Point    Focal Point Forums  Hop To Forum Categories  iWay Software Product Forum on Focal Point    Scheduler Configuration in DMC

Copyright © 1996-2020 Information Builders