Focal Point Banner
Community Center Education Summit Technical Support User Groups
Let's Get Social!

Facebook Twitter LinkedIn YouTube
Focal Point    Focal Point Forums  Hop To Forum Categories  WebFOCUS/FOCUS Forum on Focal Point     [SOLVED] Merging 2 different graph types
Go
New
Search
Notify
Tools
Reply
  
[SOLVED] Merging 2 different graph types
 Login/Join
 
Guru
posted
Is there a way we can merge 2 different graph types into 1?

What I'm trying to do is merge an Area Graph and a Scatter chart into one graph. I have 4 fields, X1, Y1, Y2, Y3 that would plot the Area Graph then over this graph, I want 2 fields, X2,Y4 to display as scatter points. Both X1 and X2 uses the same X axis and all Y* fields use the same Y axis.

GRMERGE only merges different fields into the same axis but still using the same graph type. Thank you for your assistance.

This message has been edited. Last edited by: Anatess,


WF 8.1.05 Windows
 
Posts: 332 | Location: Orlando, FL | Registered: October 17, 2006Reply With QuoteReport This Post
<JG>
posted
Logically you can not merge graph types that have different data requirements.

An area plot requires 1 measure and an ordinal axis value.

A scatter graph on the other hand requires 2 measures

If on the other hand you are talking about a chart that shows
an area and some points that's a little different

your area is simply series 0
your 1st point is series 1
your third point is series 2

set your graph type to line
then use either the advanced graph assistant or manually
add the API calls to change series 0 to Area.

-* set series type to area
setSeriesType(getSeries(0), 3);
-* hide the lines for the other plot points
setConnectLineMarkers(false);
 
Reply With QuoteReport This Post
Expert
posted Hide Post
Anatess,

Can you provide a sample of what you really want? Perhaps in an excel file?

Doug
 
Posts: 3066 | Location: Middle Tennessee [8204M Gen48 in Test&Prod] | Registered: February 23, 2005Reply With QuoteReport This Post
Guru
posted Hide Post
What I really want is overlaying one graph over another.

So, basically, I have a static area graph that shows different completion stages and how "feverish" that area is. So X is the completion percentage, Y is the buffer percentage. The area that corresponds to Y less than (.4X+10) is a low fever area. Above low fever but less than (.7X+20) is medium fever. Anything higher is high fever.

Then I have a scatter graph that shows individual project completions and their corresponding buffer.

Overlaying the scatter graph over the area graph would show where each project lies in the fever chart and is a quick visualization of the density of projects in each fever zone.

I don't know how to illustrate this using the CAR file...


WF 8.1.05 Windows
 
Posts: 332 | Location: Orlando, FL | Registered: October 17, 2006Reply With QuoteReport This Post
Expert
posted Hide Post
OK, if you cannot do it using the CAR file, then can you provide the data you want plotted and show the application of the data points to the graph? Perhaps we can some MacGyver techniques.
 
Posts: 3066 | Location: Middle Tennessee [8204M Gen48 in Test&Prod] | Registered: February 23, 2005Reply With QuoteReport This Post
Virtuoso
posted Hide Post
Anyone know if it's possible to great a graph with a "transparent" background? If so, Anatess could just create two graphs of identical size and truly "overlay" them by providing each with the exact same coordinates. Just a thought (with no testing involved--)


Regards,

Darin



In FOCUS since 1991
WF Server: 7.7.04 on Linux and Z/OS, ReportCaster, Self-Service, MRE, Java, Flex
Data: DB2/UDB, Adabas, SQL Server Output: HTML,PDF,EXL2K/07, PS, AHTML, Flex
WF Client: 77 on Linux w/Tomcat
 
Posts: 2298 | Location: Salt Lake City, Utah | Registered: February 02, 2007Reply With QuoteReport This Post
Guru
posted Hide Post
Darin, if we can figure that one out, that would be really great! Since the area graph is static, it can even be saved as an image without having to run a graph.


WF 8.1.05 Windows
 
Posts: 332 | Location: Orlando, FL | Registered: October 17, 2006Reply With QuoteReport This Post
<JG>
posted
quote:
Anyone know if it's possible to great a graph with a "transparent" background?

The answer to that is easy, It's NO.

WebFocus can not create or use transparent images.

The reason is a cross-platform compatibility issue (well that's what's always been claimed).
 
Reply With QuoteReport This Post
<JG>
posted
quote:
Since the area graph is static, it can even be saved as an image without having to run a graph

Anatess now if you'd said that in the first place, that's easy.

Set your area graph image as the frame background of your chart

look at this article Inserting Images Into WebFOCUS Graphs

You will need to use the following API calls

setFillType(getFrame(),3);
setTextureURL(getFrame(),"/your image.jpg");

Pay special attention to where you store the image.
 
Reply With QuoteReport This Post
Guru
posted Hide Post
JG, thank you very very much! I think this will work. Just need to make sure the axes are spot-on (overlayed perfectly) and this should be okay. The axes are percentages, from 0 to 100, so it is static as well.


WF 8.1.05 Windows
 
Posts: 332 | Location: Orlando, FL | Registered: October 17, 2006Reply With QuoteReport This Post
Guru
posted Hide Post
JG, I couldn't make it work.

Okay, this is what I want to do:



And this is what I get:


Help!


WF 8.1.05 Windows
 
Posts: 332 | Location: Orlando, FL | Registered: October 17, 2006Reply With QuoteReport This Post
<JG>
posted
Anatess, can you post a sample of your code based on the car or one of
the other standard IB files and I'll have a look at it.
 
Reply With QuoteReport This Post
Guru
posted Hide Post
Okay, here's the code for the background:
DEFINE FILE CAR
KNTR/I1 WITH SALES=KNTR + 1;
CCCOMPLETE/I11 WITH SALES=IF KNTR EQ 1 THEN 0 ELSE IF KNTR EQ 2 THEN 100 ELSE 0;
Y3/I3 WITH SALES=IF KNTR EQ 1 THEN 10 ELSE IF KNTR EQ 2 THEN 50 ELSE 0;
Y2/I3 WITH SALES=IF KNTR EQ 1 THEN 20 ELSE IF KNTR EQ 2 THEN 90 ELSE 0;
Y1/I3 WITH SALES=IF KNTR EQ 1 THEN 100 ELSE IF KNTR EQ 2 THEN 100 ELSE 0;
BUFFERIMPACT/I11 WITH SALES =IF KNTR EQ 1 THEN 0;
END
TABLE FILE CAR
PRINT
      Y1
	  Y2
	  Y3
	  BUFFERIMPACT
BY CCCOMPLETE
WHERE RECORDLIMIT EQ 2
ON TABLE HOLD AS FVRBGRND
END
-RUN
GRAPH FILE FVRBGRND
SUM Y1 Y2 Y3 BUFFERIMPACT
ACROSS CCCOMPLETE IN-RANGES-OF 10
ON GRAPH SET LOOKGRAPH VAREA
ON GRAPH SET GRAPHEDIT SERVER
ON GRAPH SET BARNUMB OFF
ON GRAPH SET 3D OFF
ON GRAPH SET VZERO ON
ON GRAPH SET GRID ON
ON GRAPH PCHOLD FORMAT PNG
ON GRAPH SET GRAPHSTYLE *
setScaleMaxAuto(getY1Axis(),false);
setScaleMax(getY1Axis(),100.0);
setExtendToFrameEdge(true);
setMarkerDisplay(true);
setConnectLineMarkers(false);
setConnectScatterMarkers(false);
setO1LabelDisplay(true);
setO1AxisSide(0);
setO1MajorGridDisplay(true);
setO1MajorGridStyle(0);
setO1MinorGridDisplay(false);
setAxisAssignment(0,0);
setSeriesType(0,3);
setAxisAssignment(1,0);
setSeriesType(1,3);
setAxisAssignment(2,0);
setSeriesType(2,3);
setAxisAssignment(3,0);
setSeriesType(3,2);
setY1LabelDisplay(true);
setY1AxisSide(0);
setY1MajorGridDisplay(true);
setY1MajorGridStyle(0);
setY1MinorGridDisplay(false);
setGridStyle(getY1MajorGrid(),3);
setGridStyle(getO1MajorGrid(),3);
setTextFormatPreset(getY1Label(),-1);
setTextFormatPattern(getY1Label(),"#.##");
setPieFeelerTextDisplay(1);
setPieLabelDisplay(0);
setTextFormatPreset(getPieSliceLabel(),1);
setRiserBorderMode(1);
setSeriesDefaultTransparentBorderColor(true);
setUseSeriesBorderDefaults(true);
setLegendDisplay(true);
setFontSizeAbsolute(getY1Title(),true);
setFontSizeAbsolute(getY1Label(),true);
setFontSizeAbsolute(getY2Title(),true);
setFontSizeAbsolute(getY2Label(),true);
setFontSizeAbsolute(getO1Title(),true);
setPlace(true);
setGridStepAuto(getY1MajorGrid(),false);
setGridStep(getY1MajorGrid(),10.0);
setTextRotation(getO1Label(),0);
setTextString(getY1Title(),"NUMBER1");
setDisplay(getY1Title(),true);
setTextString(getO1Title(),"NUMBER2");
setDisplay(getO1Title(),true);
setDisplay(getLegendArea(),false);
setMarkerSize(getSeries(0),0);
setMarkerSize(getSeries(1),0);
setMarkerSize(getSeries(2),0);
setMarkerSize(getSeries(3),50);
setFillColor(getSeries(3),new Color(0,0,0));
setMarkerShape(getSeries(3),6);
ENDSTYLE
ON GRAPH SET STYLE *
     PAGESIZE='Letter',
     LEFTMARGIN=0.250000,
     RIGHTMARGIN=0.250000,
     TOPMARGIN=0.250000,
     BOTTOMMARGIN=0.250000,
     SQUEEZE=ON,
     ORIENTATION=PORTRAIT,
$
TYPE=REPORT,
     GRID=OFF,
     FONT='TIMES NEW ROMAN',
     SIZE=10,
     BACKCOLOR='NONE',
     STYLE=NORMAL,
$
TYPE=DATA,
     ACROSSCOLUMN=N1,
     COLOR='RED',
$
TYPE=DATA,
     ACROSSCOLUMN=N2,
     COLOR='YELLOW',
$
TYPE=DATA,
     ACROSSCOLUMN=N3,
     COLOR='GREEN',
$
ENDSTYLE
END



And here's the scatter. I commented out the background code because it will be different to your installation.
DEFINE FILE CAR
NUMBER1/I1= IF COUNTRY EQ 'ENGLAND' THEN 10 ELSE IF COUNTRY EQ 'JAPAN' THEN 20 ELSE IF COUNTRY EQ 'USA' THEN 30 ELSE 40;
NUMBER2/I1= IF COUNTRY EQ 'ENGLAND' THEN 20 ELSE IF COUNTRY EQ 'JAPAN' THEN 40 ELSE IF COUNTRY EQ 'USA' THEN 60 ELSE 80;
END
GRAPH FILE CAR
-* Created by Advanced Graph Assistant
PRINT NUMBER1
BY NUMBER2
ON GRAPH PCHOLD AS HOLD FORMAT PNG
ON GRAPH SET BARNUMB OFF
ON GRAPH SET 3D OFF
ON GRAPH SET VZERO ON
ON GRAPH SET GRID ON
ON GRAPH SET HAXIS 770
ON GRAPH SET VAXIS 405
ON GRAPH SET UNITS PIXELS
ON GRAPH SET LOOKGRAPH SCATTERS
ON GRAPH SET GRMERGE ADVANCED
ON GRAPH SET GRMULTIGRAPH 0
ON GRAPH SET GRLEGEND 0
ON GRAPH SET GRXAXIS 1
ON GRAPH SET GRAPHSTYLE *
setReportParsingErrors(false);
setSelectionEnableMove(false);
setMarkerDisplay(true);
setConnectLineMarkers(false);
setConnectScatterMarkers(false);
setO1LabelDisplay(true);
setO1AxisSide(0);
setO1MajorGridDisplay(true);
setO1MajorGridStyle(0);
setO1MinorGridDisplay(false);
setAxisAssignment(0,0);
setY1LabelDisplay(true);
setY1AxisSide(0);
setY1MajorGridDisplay(true);
setY1MajorGridStyle(0);
setY1MinorGridDisplay(false);
setTextFormatPreset(getY1Label(),-1);
setTextFormatPattern(getY1Label(),"#.##");
setPieFeelerTextDisplay(1);
setPieLabelDisplay(0);
setTextFormatPreset(getPieSliceLabel(),1);
setRiserBorderMode(1);
setSeriesDefaultTransparentBorderColor(true);
setUseSeriesBorderDefaults(true);
setLegendDisplay(true);
setFontSizeAbsolute(getY1Title(),true);
setFontSizeAbsolute(getY1Label(),true);
setFontSizeAbsolute(getY2Title(),true);
setFontSizeAbsolute(getY2Label(),true);
setFontSizeAbsolute(getO1Title(),true);
setPlace(true);
setScaleMaxAuto(getX1Axis(),false);
setScaleMaxAuto(getY1Axis(),false);
setScaleMax(getY1Axis(),100.0);
setGridStepAuto(getY1MajorGrid(),false);
setGridStep(getY1MajorGrid(),10.0);
setGridStepAuto(getX1MajorGrid(),false);
setGridStep(getX1MajorGrid(),10.0);
-*setFillType(getChartBackground(),3);
-*setTextureURL(getChartBackground(),"/images/custom/fever_chart.jpg");
ENDSTYLE
ON GRAPH SET STYLE *
TYPE=REPORT, ORIENTATION=PORTRAIT, SQUEEZE=ON, $
TYPE=REPORT, FONT='TIMES NEW ROMAN', SIZE=10, GRID=OFF, $
ENDSTYLE
END


WF 8.1.05 Windows
 
Posts: 332 | Location: Orlando, FL | Registered: October 17, 2006Reply With QuoteReport This Post
<JG>
posted
Anatess best I could come up with



 
-SET &GRAPH=HHMMSS('A8');
-SET &GRAPH='fever_chart'||EDIT('&GRAPH.EVAL','99$99$99');
DEFINE FILE CAR
KNTR/I1 WITH SALES=KNTR + 1;
CCCOMPLETE/I11 WITH SALES=IF KNTR EQ 1 THEN 0 ELSE IF KNTR EQ 2 THEN 100 ELSE 0;
Y3/I3 WITH SALES=IF KNTR EQ 1 THEN 10 ELSE IF KNTR EQ 2 THEN 50 ELSE 0;
Y2/I3 WITH SALES=IF KNTR EQ 1 THEN 20 ELSE IF KNTR EQ 2 THEN 90 ELSE 0;
Y1/I3 WITH SALES=IF KNTR EQ 1 THEN 100 ELSE IF KNTR EQ 2 THEN 100 ELSE 0;
BUFFERIMPACT/I11 WITH SALES =IF KNTR EQ 1 THEN 0;
END
TABLE FILE CAR
PRINT
      Y1
   Y2
   Y3
   BUFFERIMPACT
BY CCCOMPLETE
WHERE RECORDLIMIT EQ 2
ON TABLE HOLD AS FVRBGRND
END
-RUN

GRAPH FILE FVRBGRND
SUM Y1 AS '' 
    Y2 AS '' 
	Y3 AS '' 
	BUFFERIMPACT AS ''
ACROSS CCCOMPLETE AS '' IN-RANGES-OF 10
ON GRAPH SET LOOKGRAPH VAREA
ON GRAPH SET GRAPHEDIT SERVER
ON GRAPH SET BARNUMB OFF
ON GRAPH SET 3D OFF
ON GRAPH SET HAXIS 770
ON GRAPH SET VAXIS 405
ON GRAPH SET VZERO ON
ON GRAPH SET GRID OFF
ON GRAPH HOLD AS &GRAPH.EVAL FORMAT JPEG
ON GRAPH SET GRAPHSTYLE *
setScaleMaxAuto(getY1Axis(),false);
setScaleMax(getY1Axis(),100.0);
setScaleMax(getO1Axis(),100.0);
setExtendToFrameEdge(true);
setMarkerDisplay(true);
setY1LabelDisplay(false);
setO1LabelDisplay(false);
setO1AxisSide(0);
setO1MajorGridDisplay(true);
setO1MajorGridStyle(0);
setO1MinorGridDisplay(false);
setAxisAssignment(0,0);
setSeriesType(0,3);
setAxisAssignment(1,0);
setSeriesType(1,3);
setAxisAssignment(2,0);
setSeriesType(2,3);
setAxisAssignment(3,0);
setSeriesType(3,2);
setY1LabelDisplay(false);
setY1AxisSide(0);
setY1MajorGridDisplay(true);
setY1MinorGridDisplay(false);
setSeriesDefaultTransparentBorderColor(true);
setUseSeriesBorderDefaults(true);
setLegendDisplay(false);
setFontSizeAbsolute(getY1Title(),true);
setPlace(false);
setGridStepAuto(getY1MajorGrid(),false);
setGridStep(getY1MajorGrid(),10.0);
setTextRotation(getO1Label(),0);
setDisplay(getY1Title(),false);
setDisplay(getO1Title(),flase);
setDisplay(getLegendArea(),false);
setMarkerSize(getSeries(0),0);
setMarkerSize(getSeries(1),0);
setMarkerSize(getSeries(2),0);
setMarkerSize(getSeries(3),50);
setFillColor(getSeries(3),new Color(0,0,0));
setMarkerShape(getSeries(3),6);
ENDSTYLE
ON GRAPH SET STYLE *
     PAGESIZE='Letter',
     LEFTMARGIN=0.250000,
     RIGHTMARGIN=0.250000,
     TOPMARGIN=0.250000,
     BOTTOMMARGIN=0.250000,
     SQUEEZE=ON,
     ORIENTATION=PORTRAIT,
$
TYPE=REPORT,
     GRID=OFF,
     FONT='TIMES NEW ROMAN',
     SIZE=10,
     BACKCOLOR='NONE',
     STYLE=NORMAL,
$
TYPE=DATA,
     ACROSSCOLUMN=N1,
     COLOR='RED',
$
TYPE=DATA,
     ACROSSCOLUMN=N2,
     COLOR='YELLOW',
$
TYPE=DATA,
     ACROSSCOLUMN=N3,
     COLOR='GREEN',
$
ENDSTYLE
END
-* change to your location (Note in 7.6.9, dev studio at least, any directory other than \ibi_html\javaassist\images does not work)
-RUN
!DEL  C:\ibi\DevStudio76\ibi_html\javaassist\images\&GRAPH.EVAL.jpg
-RUN
!COPY /Y &GRAPH.EVAL.jpg C:\ibi\DevStudio76\ibi_html\javaassist\images\&GRAPH.EVAL.jpg
-RUN
DEFINE FILE CAR
NUMBER1/I1= IF COUNTRY EQ 'ENGLAND' THEN 10 ELSE IF COUNTRY EQ 'JAPAN' THEN 20 ELSE IF COUNTRY EQ 'USA' THEN 30 ELSE 40;
NUMBER2/I1= IF COUNTRY EQ 'ENGLAND' THEN 20 ELSE IF COUNTRY EQ 'JAPAN' THEN 40 ELSE IF COUNTRY EQ 'USA' THEN 60 ELSE 80;
END
GRAPH FILE CAR
-* Created by Advanced Graph Assistant
PRINT NUMBER1 
BY NUMBER2 
ON GRAPH PCHOLD AS HOLD FORMAT PNG
ON GRAPH SET BARNUMB OFF
ON GRAPH SET 3D OFF
ON GRAPH SET VZERO ON
ON GRAPH SET GRID ON
ON GRAPH SET HAXIS 770
ON GRAPH SET VAXIS 405
ON GRAPH SET UNITS PIXELS
ON GRAPH SET LOOKGRAPH SCATTERS
ON GRAPH SET GRMERGE ADVANCED
ON GRAPH SET GRMULTIGRAPH 0
ON GRAPH SET GRLEGEND 0
ON GRAPH SET GRXAXIS 1
ON GRAPH SET GRAPHSTYLE *
setReportParsingErrors(false);
setSelectionEnableMove(false);
setMarkerDisplay(true);
setConnectLineMarkers(false);
setConnectScatterMarkers(false);
setO1LabelDisplay(true);
setO1AxisSide(0);
setO1MajorGridDisplay(true);
setO1MajorGridStyle(0);
setO1MinorGridDisplay(false);
setAxisAssignment(0,0);
setY1LabelDisplay(true);
setY1AxisSide(0);
setY1MajorGridDisplay(true);
setY1MajorGridStyle(0);
setY1MinorGridDisplay(false);
setTextFormatPreset(getY1Label(),-1);
setTextFormatPattern(getY1Label(),"#.##");
setTextFormatPreset(getPieSliceLabel(),1);
setRiserBorderMode(1);
setSeriesDefaultTransparentBorderColor(true);
setUseSeriesBorderDefaults(true);
setLegendDisplay(true);
setFontSizeAbsolute(getY1Title(),true);
setFontSizeAbsolute(getY1Label(),true);
setFontSizeAbsolute(getY2Title(),true);
setFontSizeAbsolute(getY2Label(),true);
setFontSizeAbsolute(getO1Title(),true);
setPlace(false);
setScaleMaxAuto(getX1Axis(),false);
setScaleMaxAuto(getY1Axis(),false);
setScaleMax(getY1Axis(),100.0);
setGridStepAuto(getY1MajorGrid(),false);
setGridStep(getY1MajorGrid(),10.0);
setGridStepAuto(getX1MajorGrid(),false);
setGridStep(getX1MajorGrid(),10.0);

setFrameDisplay(false);
setFillType(getChartBackground(),3);
setTextureURL(getChartBackground(),"/images/&GRAPH.EVAL.jpg");
ENDSTYLE
ON GRAPH SET STYLE *
TYPE=REPORT, ORIENTATION=PORTRAIT, SQUEEZE=ON, $
TYPE=REPORT, FONT='TIMES NEW ROMAN', SIZE=10, GRID=OFF, $
ENDSTYLE
END

 

This message has been edited. Last edited by: <JG>,
 
Reply With QuoteReport This Post
Expert
posted Hide Post
Yes, we can do that in WebFOCUS!

If I understand you correctly then I did this using a variation of what you started with and added some HTMLTABLE / HTMLFORM code to produce THIS. This was completed using the basic code, as follows:
GRAPH FILE X
...
ON GRAPH SET HAXIS 900
ON GRAPH SET VAXIS 600
ON GRAPH HOLD AS GRAPH1 FORMAT HTMTABLE
...
END
GRAPH FILE Y
...
ON GRAPH SET HAXIS 600
ON GRAPH SET VAXIS 400
ON GRAPH HOLD AS GRAPH2 FORMAT HTMTABLE
...
END
-HTMLFORM BEGIN
...
-HTMLFORM END
-TheEnd
GRAPH1 is your background and GRAPH2 is your foreground. You'll need to play around with the sizing, positions, titles, etc...




   In FOCUS Since 1983 ~ from FOCUS to WebFOCUS.
   Currently with Fidelity Investments
 
Posts: 3066 | Location: Middle Tennessee [8204M Gen48 in Test&Prod] | Registered: February 23, 2005Reply With QuoteReport This Post
<JG>
posted
That's the point Doug
THIS

Is exactly what Anatess does not want.

As I said originally you cannot overlay two graphs because the graph engine can not produce transparent images.

The only method is the one I've shown above.
 
Reply With QuoteReport This Post
Expert
posted Hide Post
OK JG, Thanks for the clarification... I got confused... So, Anatess, what I produced would be good IF the second graph (the grid) was transparent and the correct size for a proper overlay, right? If not, please provide a sample.
 
Posts: 3066 | Location: Middle Tennessee [8204M Gen48 in Test&Prod] | Registered: February 23, 2005Reply With QuoteReport This Post
Expert
posted Hide Post
Actually, there is a technique to do this that I got from Summit 09. I've used it back in Nationwide as well. That is, do not use a an area chart and a scatter chart. But, rather use an area chart and a line graph. The line chart has the line connection off and the line size set to one. I'll work on it and pass it along.
 
Posts: 3066 | Location: Middle Tennessee [8204M Gen48 in Test&Prod] | Registered: February 23, 2005Reply With QuoteReport This Post
<JG>
posted
Doug, Test the code that I posted back for the sample code that Anatess supplied.
It does exactly what she wants.
 
Reply With QuoteReport This Post
Expert
posted Hide Post
Thanks again JG. I continued on past your post of "Sat Jun 13 2009 03:53" for three reasons: 1) Anatess never replied as to that was what she wanted... 2) I did not get the same results as you did when I ran your code. I am running 764 on Windows. 3) I wanted to do this with only one graph.

Thanks again. Your insight has been exceptional and much appreciated. I'm outta here... Case [solved]?
 
Posts: 3066 | Location: Middle Tennessee [8204M Gen48 in Test&Prod] | Registered: February 23, 2005Reply With QuoteReport This Post
Guru
posted Hide Post
THANK YOU VERY MUCH, JG and Doug! Yes, I need that transparent background.

JG, your code works like a charm!

This message has been edited. Last edited by: Anatess,


WF 8.1.05 Windows
 
Posts: 332 | Location: Orlando, FL | Registered: October 17, 2006Reply With QuoteReport This Post
<JG>
posted
Anatess, pleased to help.

Noticed the bug that caused Doug not to get it to work.

!COPY /Y &GRAPH.EVAL.jpg C:\ibi\DevStudio\ibi_html\javaassist\images\&GRAPH.EVAL.jpg

should read

!COPY /Y &GRAPH.EVAL.jpg C:\ibi\DevStudio76\ibi_html\javaassist\images\&GRAPH.EVAL.jpg

You obviously caught that.

I've edited the post for future generations.
 
Reply With QuoteReport This Post
  Powered by Social Strata  
 

Focal Point    Focal Point Forums  Hop To Forum Categories  WebFOCUS/FOCUS Forum on Focal Point     [SOLVED] Merging 2 different graph types

Copyright © 1996-2018 Information Builders, leaders in enterprise business intelligence.