Focal Point Banner


As of December 1, 2020, Focal Point is retired and repurposed as a reference repository. We value the wealth of knowledge that's been shared here over the years. You'll continue to have access to this treasure trove of knowledge, for search purposes only.

New TIBCO Community Coming Soon
In early summer, TIBCO plans to launch a new community—with a new user experience, enhanced search, and expanded capabilities for member engagement with answers and discussions! In advance of that, the current myibi community will be retired on April 30. We will continue to provide updates here on both the retirement of myibi and the new community launch.

What You Need to Know about Our New Community
We value the wealth of knowledge and engagement shared by community members and hope the new community will continue cultivating networking, knowledge sharing, and discussion.

During the transition period, from April 20th until the new community is launched this summer, myibi users should access the TIBCO WebFOCUS page to engage.


Focal Point    Focal Point Forums  Hop To Forum Categories  WebFOCUS/FOCUS Forum on Focal Point     [SOLVED] Default Directory when you go into WebFOCUS

Read-Only Read-Only Topic
Go
Search
Notify
Tools
[SOLVED] Default Directory when you go into WebFOCUS
 Login/Join
 
Platinum Member
posted
Just want to know how you can avoid the message "The system cannot find the file specified" when you go into WebFOCUS, change directory from the default:-
D:\ibi\srv81\wfs\edatemp\ts00001 To : D:\DEV\daltoni\temp (say)
Then do a report that creates an OFFLINE.FTM file and attempt to copy it as follows:-

-SET &ECHO=ALL;
-RUN
DIR
-RUN

CD /
-RUN
CD D:\daltoni\temp
-RUN

DIR
-RUN

OFFLINE
TABLE FILE CAR
PRINT CAR
END
OFFLINE CLOSE
-RUN

COPY OFFLINE.FTM D:\daltoni\temp
-RUN
-EXIT

How do you revert to the original D:\ibi\srv81\edatemp\ts00001 directory ?


By the way here's the echo output……
-RUN
DIR
-RUN
Volume in drive D has no label.
Volume Serial Number is 00D6-BFDC
Directory of D:\ibi\srv81\wfs\edatemp\ts000001
16/04/2019 16:28 .
16/04/2019 16:28 ..
16/04/2019 16:27 0 stderr.log
16/04/2019 16:27 0 stdout.log
16/04/2019 16:28 0 sysh_4960.tmp
3 File(s) 0 bytes
2 Dir(s) 70,688,927,744 bytes free
CD /
-RUN
D:\
CD D:\DEV\daltoni\temp
-RUN
D:\DEV\daltoni\temp
DIR
-RUN
Volume in drive D has no label.
Volume Serial Number is 00D6-BFDC
Directory of D:\DEV\daltoni\temp
16/04/2019 16:10 .
16/04/2019 16:10 ..
0 File(s) 0 bytes
2 Dir(s) 70,688,927,744 bytes free
SET TEMPERASE=OFF
OFFLINE
TABLE FILE CAR
PRINT CAR
END
OFFLINE CLOSE
-RUN
0 NUMBER OF RECORDS IN TABLE= 10 LINES= 10
0 OFFLINE...
COPY OFFLINE.FTM D:\DEV\daltoni\temp <== this copy statement expects OFFLINE.FTM to be in D:\DEV\daltoni\temp
-RUN
The system cannot find the file specified. <== the file is actually in D:\ibi\srv81\wfs\edatemp\ts000001
-EXIT

This message has been edited. Last edited by: FP Mod Chuck,


_______________________
*** WebFOCUS 8.1.05M ***
 
Posts: 196 | Location: London, UK | Registered: December 06, 2005Report This Post
Virtuoso
posted Hide Post
Could you explain the use case that requires all of this?


WebFOCUS 8206, Unix, Windows
 
Posts: 1853 | Location: New York City | Registered: December 30, 2015Report This Post
Platinum Member
posted Hide Post
The reason I need to do this is that one of our older applications uses OFFLINE, followed by a report, then OFFLINE CLOSE followed by a COPY of the OFFLINE.FTM file to somewhere safe. The OFFLINE.FTM file is held temporarily in \ibi\srv81\wfs\edatemp\ts00001 (or similar). If however you introduce DOS CD statements to alter the current directory prior to running the report to something else, the OFLINE.FTM file still goes to the \ibi\srv81\wfs\edatemp\ts00001 directory, but the COPY statement fails because the the new active directory has been changed. It also points to the new directory for the duration of the session. I hope this explains things.


_______________________
*** WebFOCUS 8.1.05M ***
 
Posts: 196 | Location: London, UK | Registered: December 06, 2005Report This Post
Expert
posted Hide Post
quote:
OFFLINE


Hi Ian,

As mentioned to you, using OFFLINE is archaic (most recent members will probably say "what?") and should now be changed to use more "modern" forms of coding.

Try using ON TABLE HOLD AS …… FORMAT …. to use direct control over your output. Even using FILEDEF as required.

Continuing to use OFFLINE will only lead to issues later "down the line".


T



In FOCUS
since 1986
WebFOCUS Server 8.2.01M, thru 8.2.07 on Windows Svr 2008 R2  
WebFOCUS App Studio 8.2.06 standalone on Windows 10 
 
Posts: 5694 | Location: United Kingdom | Registered: April 08, 2004Report This Post
Platinum Member
posted Hide Post
Thanks Tony - realise OFFLINE is 'archiac' but we are stuck with it short of changing all reports programs (100+) to a 'newer' approach.


_______________________
*** WebFOCUS 8.1.05M ***
 
Posts: 196 | Location: London, UK | Registered: December 06, 2005Report This Post
Expert
posted Hide Post
… then I would suggest using a capture of the EDATEMP location into a variable and using that to prefix the file that you want to copy.

Capturing this value has been covered a few times, but is essentially -
-SET &TEMPPATH=TEMPPATH(80,'A80');
-SET &TEMPPATH = TRUNCATE(&TEMPPATH);
-TYPE &TEMPPATH


This should allow you to specify the correct path.

However, I would urge you to modify the usage as you encounter them rather than hit this issue again in the future.

It might or might not be you that has to support it Razzer


T



In FOCUS
since 1986
WebFOCUS Server 8.2.01M, thru 8.2.07 on Windows Svr 2008 R2  
WebFOCUS App Studio 8.2.06 standalone on Windows 10 
 
Posts: 5694 | Location: United Kingdom | Registered: April 08, 2004Report This Post
Platinum Member
posted Hide Post
Thanks Tony. I did something along the lines of DIR > filename.txt and then used Dialog Manager to get the directory path.
Yours is so much simpler !!


_______________________
*** WebFOCUS 8.1.05M ***
 
Posts: 196 | Location: London, UK | Registered: December 06, 2005Report This Post
  Powered by Social Strata  

Read-Only Read-Only Topic

Focal Point    Focal Point Forums  Hop To Forum Categories  WebFOCUS/FOCUS Forum on Focal Point     [SOLVED] Default Directory when you go into WebFOCUS

Copyright © 1996-2020 Information Builders