In FOCUS since 1986 | WebFOCUS Server 8.2.01M, thru 8.2.07 on Windows Svr 2008 R2 | ||
WebFOCUS App Studio 8.2.06 standalone on Windows 10 |
In FOCUS since 1986 | WebFOCUS Server 8.2.01M, thru 8.2.07 on Windows Svr 2008 R2 | ||
WebFOCUS App Studio 8.2.06 standalone on Windows 10 |
In FOCUS since 1986 | WebFOCUS Server 8.2.01M, thru 8.2.07 on Windows Svr 2008 R2 | ||
WebFOCUS App Studio 8.2.06 standalone on Windows 10 |
In FOCUS since 1986 | WebFOCUS Server 8.2.01M, thru 8.2.07 on Windows Svr 2008 R2 | ||
WebFOCUS App Studio 8.2.06 standalone on Windows 10 |
################################################################################ # # InstallShield Options File # # Wizard name: Install # Wizard source: webfocus.jar # Created on: Fri Aug 18 10:01:41 BST 2006 # Created by: InstallShield Options File Generator # # This file contains values that were specified during a recent execution of # Install. It can be used to configure Install with the options specified below # when the wizard is run with the "-options" command line option. Read each # setting's documentation for information on how to change its value. # # A common use of an options file is to run the wizard in silent mode. This lets # the options file author specify wizard settings without having to run the # wizard in graphical or console mode. To use this options file for silent mode # execution, use the following command line arguments when running the wizard: # # -options "C:\wf_client.txt" -silent # ################################################################################ ################################################################################ # # Debug Mode # # The Debug Mode is a switch that allows tracing to be turned on and off. Valid # Values are ON and OFF # -W Debug.mode=ON ################################################################################ # # Debug Level # # The Debug Level allows for setting different levels of tracing. Level is # ignored if the Debug mode is OFF. Valid Values are 1,2,3,4. The higher the # number the more information is written. It is not recommended to set the level # above 2 since this might slow the install down. # -W Debug.level=1 ################################################################################ # # Debug/trace file name # # The is the full path of the install trace file. It will be prepended with a # unique number in order to keep track of individual runs. # -W Debug.fileName="C:\temp\debug_713.txt" ################################################################################ # # Approval State # # The initial state of the Approval panel. Legal values are: # # 0 - Nothing will be selected # 1 - "I accept the terms in the license agreement." will be selected # 2 - "I do not accept the terms in the license agreement." will be selected # # For example, to configure the panel to initially display "I do not accept the # terms in the license agreement.", use # # -W Approval.selection=2 # -W Approval.selection=1 ################################################################################ # # User Input Field - installType # # -W InstallType.installType="New" ################################################################################ # # License Code # # A four-digit license code was packaged with your WebFOCUS shipment. This # license code determines which components you can install. Please enter your # four-digit license code. # -W LicenseCodePanel.licenseCode= ################################################################################ # # WebFOCUS Web Components # # The following feature can be disabled during the install. To disable this # feature, uncomment the line with the -P by removing the # character from the # beginning of the line. DO NOT UNCOMMENT AND SET TO TRUE. This feature should # only be disabled when installing the ReportCaster Distribution Server # separately. # #-P WebfocusFeature.active=false ################################################################################ # # Demo Application Files # # The following feature can be disabled during the install. To disable this # feature, uncomment the line with the -P by removing the # character from the # beginning of the line. DO NOT UNCOMMENT AND SET TO TRUE. This feature should # only be disabled when Demo Application files will not be installed. # #-P Apps.active=false ################################################################################ # # Managed Reporting # # The following feature can be disabled during the install. To disable this # feature, uncomment the line with the -P by removing the # character from the # beginning of the line. DO NOT UNCOMMENT AND SET TO TRUE. This feature should # only be disabled when Managed Reporting is not required # #-P UASFeature.active=false ################################################################################ # # ReportCaster Web Components # # The following feature can be disabled during the install. To disable this # feature, uncomment the line with the -P by removing the # character from the # beginning of the line. DO NOT UNCOMMENT AND SET TO TRUE. This feature should # only be disabled when ReportCaster is not required. In addition, the # Distribution Server should also be disabled. # #-P ReportCasterFeature.active=false ################################################################################ # # Report Library # # The following feature can be disabled during the install. To disable this # feature, uncomment the line with the -P by removing the # character from the # beginning of the line. DO NOT UNCOMMENT AND SET TO TRUE. This feature should # only be disabled when Report Library is not required.. # #-P ReportLibraryFeature.active=false ################################################################################ # # Two-Way Email # # The following feature can be disabled during the install. To disable this # feature, uncomment the line with the -P by removing the # character from the # beginning of the line. DO NOT UNCOMMENT AND SET TO TRUE. This feature should # only be disabled when TwoWay Email is not required. # #-P TwoWayFeature.active=false ################################################################################ # # ReportCaster Distribution Server # # The following feature can be disabled during the install. To disable this # feature, uncomment the line with the -P by removing the # character from the # beginning of the line. DO NOT UNCOMMENT AND SET TO TRUE. This feature should # only be disabled when the ReportCaster Distribution Server is installed # separately. # #-P ReportCasterDSFeature.active=false ################################################################################ # # Applications Directory # # This is where the WebFOCUS applications will be installed. # -W WFMultipleDestinationPanel.wfAppsDestination=C:\ibi\apps ################################################################################ # # WebFOCUS Install Directory # # This is where WebFOCUS will be installed. # -W WFMultipleDestinationPanel.wfWSDestination=C:\ibi\WebFOCUS71 ################################################################################ # # ReportCaster Distribution Server Directory # # This is where The ReportCaster Distribution Server will be installed. # -W WFMultipleDestinationPanel.rcDSDestination=C:\ibi\ReportCaster71 ################################################################################ # # WebFOCUS Program Menu # # -W ProgramMenusPanel.wfProgramMenuName="WebFOCUS 713" ################################################################################ # # ReportCaster Program Menu # # Enter a name for the ReportCaster Program Menu Folder that will appear in the # Windows Start menu. A Windows service name will be derived from it, so it must # be unique. # -W ProgramMenusPanel.rcProgramMenuName="ReportCaster 713" ################################################################################ # # Host Name # # Enter the hostname or IP address for the default WebFOCUS Reporting Server. # -W WFServerConfigPanel.WFSHost= ################################################################################ # # Port # # Enter the port number on which the WebFOCUS Reporting Server is listening. # -W WFServerConfigPanel.WFSPort=8120 ################################################################################ # # MVS Service Name # # If you are using the MVS WebFOCUS Reporting Server, enter the MVS service # name. # -W WFServerConfigPanel.WFSServiceName= ################################################################################ # # Host Name # # Enter the fully-qualified Web Server host name you are configuring for # WebFOCUS. If this is a virtual Web site, then enter the host header value that # the virtual site responds to. For more information about configuring WebFOCUS # with virtual Web sites, see the installation manual # -W WFServerConfigPanel.webServerHost= ################################################################################ # # Port # # Enter the port number on which your Web Server listens. # -W WFServerConfigPanel.webServerPort=80 ################################################################################ # # WebFOCUS Alias # # Optionally enter a custom Web Server alias for static WebFOCUS Web pages. # -W ContextAliasConfigPanel.wfWSAlias=ibi_html ################################################################################ # # WebFOCUS Application Context # # Optionally enter a custom context root for the WebFOCUS Web Application. This # must match your Application Server settings. # -W ContextAliasConfigPanel.wfAppContext=ibi_apps ################################################################################ # # ReportCaster Application Context # # Optionally enter a custom context root for the ReportCaster Web Application. # This must match your Application Server settings. # -W ContextAliasConfigPanel.rcAppContext=rcaster ################################################################################ # # BI Dashboard Alias # # Optionally enter a custom Web server alias for the Business Intelligence # Dashboard. # -W ContextAliasConfigPanel.worpAlias=ibi_bid ################################################################################ # # ReportCaster Distribution Server Host Name # # This is the machine name where the ReportCaster Distributiuon Server will run. # -W RCRepositorySelectPanel.dsHost= ################################################################################ # # ReportCaster Distribution Server Port # # This is the Port that the ReportCaster Distribution Server listens on. # -W RCRepositorySelectPanel.dsPort=8200 ################################################################################ # # Repository Selection # # This is the Repository Type. Valid values are as follows: 1 for FOCUS 2 for # Oracle 3 for MS SQL Server 2000 4 for MS SQL 6/7 5 for DB2 6 for Another SQL # Repository 7 for MySQL # -W RCRepositorySelectPanel.repos=3 ################################################################################ # # Enable Report Library Feature # # Selecting this option allows configuration of the Report Library feature. # Since FOCUS is not a supported repository for Library FOCUS will not be # enabled. Turning it off diables configuration of Library. As a result FOCUS # will be enabled. # -W RCRepositorySelectPanel.library=false ################################################################################ # # JDBC Path # # This is the full path to the JDBC driver. This may include directories, jar # files, zip files or a combination of any of these. The entries must be # separated by a semi-colon(;) on Windows and a colon (:) on Unix. # -W JDBCPath.path="C:\Program Files\Microsoft SQL Server 2005 JDBC Driver\sqljdbc_1.0\enu\sqljdbc.jar" ################################################################################ # # ReportCaster Repository Server # # This is the Machine Name of Repository. It is needed if the repository is # FOCUS, Oracle, MS SQL Server 2000,or DB2 # -W RCRepositoryConfigPanel.reposHost= ################################################################################ # # Repository Port Number # # This is the port on which the repository listens. It is only required for # FOCUS, MS SQL Server 2000, Oracle or DB2. # -W RCRepositoryConfigPanel.reposPort= ################################################################################ # # Repository Database name or DNS Name # # The value here depends on the type of repository. For FOCUS this is the node # name or the MVS Service name. For Oracle it is the ORASID. For MS SQL Sever # 2000 and DB2 it is the Database Name. For MS SQL 6/7 it is the ODBC DNS Name. # -W RCRepositoryConfigPanel.reposDBName= ################################################################################ # # Repository User ID # # This is a valid User ID for the database being used for the ReportCaster # Repository. It is only required for Oracle, SQL Server 2000, and DB2. # -W RCRepositoryConfigPanel.reposDBOwner= ################################################################################ # # Repository User ID’s Password # # -W RCRepositoryConfigPanel.reposDBPassword= ################################################################################ # # Repository URL # # This is the Repository URL for an SQL Database not specified. This should only # be sset if you want Repository other than specified. See the JDBC Driver # Documentation for this setting # -W RCRepositoryConfigPanel.reposURL= ################################################################################ # # Repository Class # # This is the Repository Class for an SQL Database not specified. This should # only be sset if you want Repository other than specified. See the JDBC Driver # Documentation for this setting # -W RCRepositoryConfigPanel.reposClass=sun.jdbc.odbc.JdbcOdbcDriver ################################################################################ # # Mail Server Host Name # # This is the name of the Mail Server that ReportCaster uses if a schedule has # email as the delivery option. # -W RCMailFTPConfigPanel.rcMailServer= ################################################################################ # # Notification Mail Server (optional) # # This is the Mail Server ReportCaster will use to send out error notification # e-mails. # -W RCMailFTPConfigPanel.rcErrMailServer= ################################################################################ # # Host Name # # This is the FTP Server ReportCaster uses when a schedule has FTP set as the # delivery option. # -W RCMailFTPConfigPanel.rcFTPServer= ################################################################################ # # User ID # # This is a valid user on the FTP Server. # -W RCMailFTPConfigPanel.rcFTPUserID= ################################################################################ # # Password # # This is a Password for the above User ID # -W RCMailFTPConfigPanel.rcFTPPassword= ################################################################################ # # Configure ServletExec ISAPI # # This option indicates whether ServletExec should be automatically configured. # -W WebApplicationServerConfigPanel.servletExecConfig=false ################################################################################ # # Configure Aliases on IIS # # Selecting this option will configure aliases on the default IIS Web site. If # you are not using the default Web site, do not select this option. # -W WebApplicationServerConfigPanel.iisConfig=true ################################################################################ # # Install Tomcat Application Server # # Tomcat is a Web Application Server. If you do not have another Web Application # server you will need to install Tomcat. Valid values are true, to install and # false to not install. # -W WebApplicationServerConfigPanel.installTomcat=false ################################################################################ # # Configure Tomcat and IIS Plugin # # Selecting this option will configure Tomcat as the Application Server and IIS # as the HTTP LIstener. This option supports both WebFOCUS CGI and WebFOCUS # Servlet implementations. Web Server Aliases must also be set. This can be done # by using the "Configure Aliases on IIS" option # -W WebApplicationServerConfigPanel.configTomcatWithIIS=true ################################################################################ # # Configure Tomcat Stand Alone # # Selecting this option will configure Tomcat as the Web Application Server and # the HTTP Listener. This configuration does not currently support the WebFOCUS # CGI. If the WebFOCUS CGI is required, then the "Configure Tomcat and IIS # Plugin" option should be selected. # -W WebApplicationServerConfigPanel.configTomcatStandAlone=false ################################################################################ # # Run Configuration Verification Procedure # # This indicates whether you wnat to run the Configuration verification # procedure. Valid Values are true and false # -W SupplementalProgramsPanel.runCVP=false ################################################################################ # # Create ReportCaster Repository # # This indicates that you would like to create the ReportCaster reposiorty # tables. This will delete any existing tables with the same name. Valid valuse # are true and false # -W SupplementalProgramsPanel.createRepos=true ################################################################################ # # Install Sun Java SDK/JRE 1.4.2 # # The Web applications installed with WebFOCUS and ReportCaster require the JDK # 1.4.2 and the ReposrtCaster Administration tool requires the Java Web Start # which is pakaged with the JRE. Valid Values are true to install and false to # not install. # -W SupplementalProgramsPanel.installJVM=false ################################################################################ # # Set WebFOCUS Directory Permissions # # Selecting this option will grant change access of selected WebFOCUS # Directories to the Internet Guest ID, the Anonymous Logon group, the # Authenticated Users group and the system. # -W SupplementalProgramsPanel.wfPermissions=true ################################################################################ # # Start the ReportCaster Distribution Server # # This will start the ReportCaster Distribution Server as a service. # -W SupplementalProgramsPanel.startDS=true
In FOCUS since 1986 | WebFOCUS Server 8.2.01M, thru 8.2.07 on Windows Svr 2008 R2 | ||
WebFOCUS App Studio 8.2.06 standalone on Windows 10 |
In FOCUS since 1986 | WebFOCUS Server 8.2.01M, thru 8.2.07 on Windows Svr 2008 R2 | ||
WebFOCUS App Studio 8.2.06 standalone on Windows 10 |